12 solder-in style high temp emi filters ys/yr series ?.165 dia. ?circuits available ?c & l the ys series provides increased filtering in the microwave frequency spectrum from 1 mhz through 10 ghz. previously unavailable in the industry as a solder-in device, this unique design offers higher values of capacitance than were previ- ously available. designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capaci- tance values are not practical. in the ? section version an internal ferrite bead element provides both inductance and series resistance (lossy characteristic) which improves insertion loss and pro- vides superior transient performance. alternate lead lengths or special capaci- tance values may be ordered. custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. ?meets or exceeds the applicable portions of mil-f-28861/15. see qpl listings. ?high temperature construction with- stands 300? installation temperatures. ?features rugged monolithic discoidal capacitor construction. ?glass hermetic seal on one end with epoxy seal on the opposite end. ?high purity gold plating provides excel- lent solderability or compatibility with thermal and ultrasonic wire bonding. 1. plating: gold standard ?silver available 2. material: case: cold rolled steel leads: alloy 52 steel 3. operating temperature range: -55? to +125? 4. insulation resistance: at 25?: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less at 125?: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. dielectric withstanding voltage (dwv): r-level designs: 2.0 times rated dc voltage class b, class s designs: 2.5 times rated dc voltage 6. dc resistance (dcr): .01 ohm, maximum 7. dissipation factor (df): 3% maximum 8. rated dc current: 5 amps, maximum 9. maximum installation temperature: 300? 10. supplied with 60/40 solder preform for easy installation 11. insertion loss for the ??and ??circuits are equivalent due to the saturation characteristic of the ferrite bead element at full rated current. at lower currents the ??becomes much more effective. specifications .165 .005 .025 .005 a .25 .03 (2 plc) b glass seal .200 .005 .032 .002 0.05 (.002) 4.19 (.165) 0.13 (.005) 5.08 (.200) 0.64 (.025) 6.35 (.250) 0.8 (.03) 16.51 (.650) 0.81 (.032) 19.05 (.750) 3.81 (.150) notes: 1. outline drawing shows stan- dard ys configuration. also available with glass seal at the opposite end, yr reverse configuration. 2. mil-f-28861/15 style a equivalent to standard ys configuration. style b is r everse yr configuration. 3. for ys2 or yr2 l-section filters inductor always posi- tioned at epoxy-filled end. 4. metric equivalent dimensions given for information only. millimeters (inches) c ys1, yr1 circuit diagrams standard configuration ys2 (see note 3) glass seal end flange end yr2 glass seal end flange end characteristics applications dimensions circuit a b diagram ?005 ref. l .250 .750 c .150 .650 dash no. config. 001 through 004 a 005 through 008 b mil-f-28861/15 (see note 2) (see note 4)
13 solder-in style high temp emi filters ys/yr series ?.165 dia. ?circuits available ?c & l insertion loss 2 per mil-std-220, +25? avx current dc cap 1 500 1 10 100 1000 10 p/n amp ckt voltage min. khz mhz mhz mhz mhz ghz ys1c2-152h 5 c 50 1500 5 21 42 55 ys1c2-502h 5 c 50 5000 15 34 50 60 ys1c2-103h 5 c 50 .010 4 20 35 53 60 ys1c2-153h 5 c 50 .015 7 25 40 55 60 ys1c2-203h 5 c 50 .020 8 27 41 60 65 ys1c2-273h 5 c 50 .027 4 10 30 42 65 70 ys1c2-503h 5 c 50 .050 9 15 35 44 70 70 ys1c2-753h 5 c 50 .075 12 18 37 46 70 70 ys1c2-104h 5 c 50 .1 14 20 38 48 70 70 ys2c2-152h 5 l 50 1500 6 22 48 55 ys2c2-502h 5 l 50 5000 15 35 55 60 ys2c2-103h 5 l 50 .010 4 20 36 57 60 ys2c2-153h 5 l 50 .015 7 25 45 60 60 ys2c2-203h 5 l 50 .020 8 27 46 62 65 ys2c2-273h 5 l 50 .027 4 10 30 48 65 70 ys2c2-503h 5 l 50 .050 9 15 36 50 70 70 ys2c2-753h 5 l 50 .075 12 18 37 51 70 70 ys2c2-104h 5 l 50 .1 14 20 39 52 70 70 ys1a2-152h 5 c 100 1500 5 21 42 55 ys1a2-502h 5 c 100 5000 15 34 50 60 ys1a2-103h 5 c 100 .010 4 20 35 53 60 ys1a2-153h 5 c 100 .015 7 25 40 55 60 ys1a2-203h 5 c 100 .020 8 27 41 60 65 ys1a2-273h 5 c 100 .027 10 30 42 65 70 ys1a2-503h 5 c 100 .050 9 15 35 44 70 70 ys1a2-753h 5 c 100 .075 12 18 37 46 70 70 ys2a2-152h 5 l 100 1500 6 22 48 55 ys2a2-502h 5 l 100 5000 15 35 55 60 ys2a2-103h 5 l 100 .010 4 20 36 57 60 ys2a2-153h 5 l 100 .015 7 25 45 60 60 ys2a2-203h 5 l 100 .020 8 27 46 62 65 ys2a2-273h 5 l 100 .027 10 30 48 65 70 ys2a2-503h 5 l 100 .050 9 15 36 50 70 70 ys2a2-753h 5 l 100 .075 12 18 37 51 70 70 continued 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor r esonances and other design constraints. note: a vx filters' standard configurations (e.g. zs, ys, xs, ws) have the hermetic glass seal opposite the flange end. all parts are capable of the reverse configuration with the glass seal at the flange end. all parameters are otherwise identical. the part number changes from ??to ??(e.g., standard = zs 1c2-153h; reverse = zr 1c2-153h). for special multi-unit assemblies see multi-component filter brackets section. specifications
14 solder-in style high temp emi filters ys/yr series ?.165 dia. ?circuits available ?c & l insertion loss 2 per mil-std-220, +25? avx current dc cap 1 500 1 10 100 1000 10 p/n amp ckt voltage min. khz mhz mhz mhz mhz ghz ys1b2-152h 5 c 200 1500 5 21 42 55 ys1b2-502h 5 c 200 5000 15 34 50 60 ys1b2-103h 5 c 200 .010 4 20 35 53 60 ys1b2-153h 5 c 200 .015 7 25 40 55 60 ys1b2-203h 5 c 200 .020 8 27 41 60 65 ys1b2-273h 5 c 200 .027 4 10 30 42 65 70 ys2b2-152h 5 l 200 1500 6 22 48 55 ys2b2-502h 5 l 200 5000 15 35 55 60 ys2b2-103h 5 l 200 .010 4 20 36 57 60 ys2b2-153h 5 l 200 .015 7 25 45 60 60 ys2b2-203h 5 l 200 .020 8 27 46 62 65 ys2b2-273h 5 l 200 .027 4 10 30 48 65 70 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor r esonances and other design constraints. note: a vx filters' standard configurations (e.g. zs, ys, xs, ws) have the hermetic glass seal opposite the flange end. all parts are capable of the reverse configuration with the glass seal at the flange end. all parameters are otherwise identical. the part number changes from ??to ??(e.g., standard = zs 1c2-153h; reverse = zr 1c2-153h). for special multi-unit assemblies see multi-component filter brackets section. specifications
|
